Water-based silicone PU finish construction as a reinforcing layer construction is completed in the absence of significant pollution f dust may be made directly to finish the construction within 72 hours, such as beyond the time, the adhesive surface must be polished. Construction of water-based paint layer was separated three times. The first pass: paint is water-based silicon PU stadium by a two-component material r component A and B curing agent paint composition ratio of A (waterborne curing agent):? B (water-based paint) = 1:14 (weight ratio). This two-component material is mixed well, add paint total 330-40% dilution water? Then adding special slip sand (dosage 10-15% of the total paint fi), and the material stir evenly with a roller or Gun Peng line construction, this time must be thin coating. Second pass: two-component materials are mixed uniformly, added to the total amount of paint diluted with water followed by addition of 20-30% slip special sand, added in an amount of 10% by weight of the mixed AB, material stir evenly with a roller or? spray. Third time: The aqueous topcoat material mixing the two components, add the total amount of paint diluted with water 20-30% silicon pu Stadium environmental materials manufacturers, without slip sand silicon pu court materials manufacturer, the material stir evenly with a roller or spray. ? 5 court based paint can be crossed crossed topcoat after curing. Marking paint material is an aqueous two-component silicone material Tu-pu Stadium material prices, which is a curing agent component A, component B is white paste Component A:? Component B = 1:10 (weight ratio), construction before use to proportionally mixing evenly before t this marking paint features: environmental protection, the same yellow color. Size standards in accordance with the court indicated the construction of the boundary position S, stickers, ready to use masking along the boundaries on both sides, with a small oil sweep applied directly on the surface layer of silicon PU stadium to draw marking the site of brushing one or two times draw line paint, until the surface is dry tear Masking silicon PU is an ergonomic and physical properties needed to meet the movement as a sports facility of the Ground material with good cushioning and ductility, strong bonding on the basis of a certain cure capability and automatic leveling, simple construction, excellent aging resistance, chemical stability after construction, easy to produce bubbles and other issues. Silicon PU foaming reasons: 1, the foundation does not meet the construction requirements, chalking, dirt, dust generation, moisture, etc. 2 silicon material pu stadium, construction of the thickness of each layer is too large, the surface is greater than 2mm or the presence of moisture or stains. 3, material uneven mixing. Should encounter blistering. 1. Therefore, the surface layer of bubble cut off. 2. then silicon pu and finish repair. 3. If the problem is a serious need to re-do the surface. Pu Stadium material silicon manufacturers | Wuhu silicon material pu Stadium | excellent riding sport provided by the Canton excellent riding sports facilities Engineering Limited. Guangzhou gifted riding sports facilities Engineering Limited (www.youtasports.com.cn) (www.youtasports.com.cn) strong, credible, in Guangzhou's outdoor paint and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead actor stepped into the brilliant sports and you work for a better future!